Re: oil crankcase Farmall BM

Posted by BIG JOHN on August 21, 2003 at 11:27:37 from (152.163.253.102):

In Reply to: oil crankcase Farmall BM posted by Menno Hiemstra on August 21, 2003 at 10:18:42:

Am guessing that your finger slipped and you have a BN.

If so you can pull the pan and take off the bottom plate/cover on the oil pump. This plate will wear and may need to have the surface trued to make sure that it is not warped or worn. You might want to take it to a Machine Shop if you don't have the tools and equipment to do this. It won't cost much to have it done right.

If this doesn't fix your low oil pressure then you are probably looking at an overhaul

GOOD LUCK

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: oil crankcase Farmall BM Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]