Re: SMTA Hydraulic Pressure Adjustment

Posted by Bob M on August 22, 2003 at 16:37:39 from (66.66.126.3):

In Reply to: SMTA Hydraulic Pressure Adjustment posted by Clarence on August 22, 2003 at 16:14:45:

Clarence - There is no pressure "adjustment" per se - only a relief valve in the reservoir tank that limits pressure to 1,200 psi. However I'll caution you against jacking the relief valve pressure beyond it's factory setting! Even at 1,200 psi it's hard on the cam drive gear - if you go higher there's a very high risk breaking the hub out of the cam gear or stripping something in the timing gear train.

If you're getting only 1,000 psi out of the hydraulics it means either the pump is wearing out or you've got the wrong oil in the system.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: SMTA Hydraulic Pressure Adjustment Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]