Re: where to put in oil in farmall M

Posted by Michael Soldan on September 24, 2003 at 15:59:11 from (216.46.130.24):

In Reply to: where to put in oil in farmall M posted by Hawgman on September 24, 2003 at 14:59:21:

Hawgman, the right front of the engine on the housing for the magneto is a screw on flat cap,
the size of a large jar. On the side of the oil pan are two cocks,the oil level should be between...if you open the top and no oil drains out but it does from the bottom one you will know the oil level is between..if no oil come out the bottom you need oil!..I usually add very slowly until I see it begin to seep out the top cock, then I know it is filled..good luck with the M...Mike in Exeter ontario

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: where to put in oil in farmall M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]