Re: bushing replacement {upper bolster}

Posted by T im Kincaid on September 29, 2003 at 17:09:30 from (12.217.168.45):

In Reply to: bushing replacement {upper bolster} posted by bill on September 29, 2003 at 16:43:22:

Once the nut is off you might have to tap the the shaft with a block of wood and a hammer while at the same prying between the bolster housing and the upper shaft where the front hitch bolts on. It can be set in there pretty hard after years of bouncing around and hitting bumps.
You should be fine , Tim K.

Follow Ups:

• Re: Re: bushing replacement {upper bolster} bill 04:20:09 09/30/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: bushing replacement {upper bolster} Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]