|
Farmall & IHC Tractors Discussion Board |
Re: MW live hydraulic pump for Farmall M
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Duner Wi on October 07, 2003 at 11:52:06 from (63.50.8.156):
In Reply to: MW live hydraulic pump for Farmall M posted by Dan Kelley on October 07, 2003 at 09:52:16:
Years ago I made a pump from a 400 fit on my "M" by using the "M" timing cover. The 2 bottom holes lined up but the 2 top holes were wrong. I made a "U" clamp to go around the oil fill and a bit of a fancy bracket to hold the pump. I had 2 bolts in the bracket that went into the pump just to keep the bracket from moving around. These were welded and ground flat on the dist. side. Then I think I had to tap threads in the bracket for a stud to hold something towards the dist. I have a verticle Delco Remy dist on mine. I busted the timing gears eventually so went with the heavier gears but the pump and bracket has worked for 25 or more years. Nowadays I would go with a timing cover and gears from a 400 or so but I could not find one when I did mine.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
