Re: 450 Farmall hitch

Posted by Guy on October 18, 2003 at 06:06:44 from (68.164.224.153):

In Reply to: 450 Farmall hitch posted by R. Marg on October 17, 2003 at 11:23:06:

I put the lower lift arms on the implement first. Block them up with some pieces of wood and back the tractor in to the implement. When the lower lift arms are about half way in the fast hith, raise the fast hitch a few inches and then back up until the latches lock in the lower lift arms. Get off and hook up the top link. I find it alot easier than hooking up a standard 3 point. The one problem is not all 3 point equipment is standard. I bought a new post hole digger a few years ago which was wider than 26" at the lower lift pins. Had to build a set of lower lift arms which I offset the ball ends a little bit.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 450 Farmall hitch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]