IH240-Two Questions

Posted by Slowpoke on October 28, 2003 at 14:15:34 from (67.30.97.59):

1) Can someone please tell me the length of the dipstick measured from the tip to up
under the cap and the distance from the tip to the "Add' line and the 'Full' line. Mine was removed after I paid for the tractor and before I hauled it home.

2) Is there a heavy gauge wire or a solid copper rod from the solenoid to the field coils on the starter? Someone used a 12ga stranded wire and it fried the insulation. There is a square, rubber lined opening for the wire/rod to pass thru between the case and the end plate. I don't know if it's the original starter. I tried using a short length of #4 battery cable, but it doesn't want to bend in that small a radius to meet the coil bar.
Thanks for your help.

Follow Ups:

• Re: IH240-Two Questions w gatewood 15:53:39 10/28/03 (0)

Post A Followup Name: E-Mail: Subject: Re: IH240-Two Questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]