Re: Rough running M

Posted by Steve - IN on November 02, 2003 at 20:47:30 from (12.222.30.13):

In Reply to: Rough running M posted by Ty on November 02, 2003 at 18:53:27:

Ty,
As long as you've matched the firing order, should be no problem.

Assume from what you say it runs smooth at lower RPM, just not at full throttle. Have you tried an old strobe type timing light on it? You may need to degree mark the front pulley, but that would be the quickest way to see if you're getting too much or too little advance at full throttle. You could also see if the dist is firing erratically; which would indicate spark scatter caused by worn bushings in the distributor.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Rough running M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]