Loose sleeves in my WD-6

Posted by Dave Goodwill on November 13, 2003 at 16:42:17 from (192.158.61.140):

I have a WD-6 that I am overhauling. The sleeves that I bought were loose in the block. When I measured my block, the bores were out of round and oversize. These sleeves had a 4" bore. I have purchased SWD-6/SMD sleeves which my pistons will fit in and the O.D. of the sleeve is 1/8" larger. I am going to have a machine shop bore and hone the block to fit the larger O.D. sleeves. Does anyone know what the exact bore size and tolerance for a SWD-6 or SMD block is?

Follow Ups:

• Re: Loose sleeves in my WD-6 49 Cubber! 14:13:03 11/14/03 (1)
  • Re: Re: Loose sleeves in my WD-6 justin 16:29:39 11/14/03 (0)
• Re: Loose sleeves in my WD-6 JerePa 19:34:53 11/13/03 (1)
  • Re: Re: Loose sleeves in my WD-6 David Goodwill 07:31:30 11/14/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Loose sleeves in my WD-6 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]