Re: TA on a 400

Posted by Bryce Andreasen on November 21, 2003 at 09:39:50 from (205.202.240.6):

In Reply to: TA on a 400 posted by hal on November 18, 2003 at 05:03:28:

I have a 400, looks real nice from another guy i baught it from, and low side of TA didn't work, and throw out bearing was completely out. So i tore it out, and did a trade in deal with a dealership, where you take the old TA assembly in, and you buy the new rebuilt one for around $800 or so, but the TA clutch is just like the engine clutch except smaller. If you do have to replace the clutch, you might as well do the whole thing because the shaft wich the plate slides on is usually realy wore on the splined shaft. And it doesn't hurt anything doing the whole thing considering you only take 4 bolts out on the rear and pull it out once the clutch is taken apart. Have any questions, just E-mail me at Jeffg245@hotmai.com

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: TA on a 400 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]