Re: 48 Cub with a charging problem

Posted by gene b on November 28, 2003 at 03:21:05 from (67.1.104.3):

In Reply to: 48 Cub with a charging problem posted by Dave on November 27, 2003 at 09:22:23:

First when sw is on should show discharge as amps going to coil. When it runs ground the field term of the gen to a good ground if then it shows charge it is the reg.maybe you need to polorize the gen by just momently touching the Batt term on the reg to the terminal on the gen marked with A using piece or wire. Use a meter to make sure the gen is ground to the frame also the reg is grounded also the control where the amp is mounted. Mite alsoneed to shine points on reg with piece of thin cardboard like match book cover o like to use a white piece to see if itis clean or not. I NEVER MESS WITH adjusting points on the reg.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 48 Cub with a charging problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]