Re: More FArmal H Belly pump questions

Posted by Haas on December 02, 2003 at 14:13:10 from (12.65.49.68):

In Reply to: More FArmal H Belly pump questions posted by Jody on December 02, 2003 at 10:45:22:

Rusty described how to pipe it up. The Lift all control rod has three positions. All the way forward is release or down. The fluid is released from the cylinder back into the reservoir and the implement goes down by gravity. All the way back is lift. Internal control valve in the lift all directs oil from the pump to the pressure ports and thus the cylinder. The half way point (the latch on the underside of the control rod is "hold". The load is held at the current postition, neither suppling fluid or allowing release from the cylinder.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: More FArmal H Belly pump questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]