Farmall & IHC Tractors Discussion Board |
Re: Re: Continuing missing F-20 engine saga
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Pete L on December 12, 2003 at 07:22:18 from (198.36.89.4):
In Reply to: Re: Continuing missing F-20 engine saga posted by Bill Smith on December 08, 2003 at 11:38:52:
Thanks for the input thus far guys. I do have had new Champion, then new Autolite plug in it with no impact on the issue, and swapping mags with a good running F-12 has ruled out the mag. I did use an induction type timing light to check the fire on all 4 wires, and regardless of mag setting, I was getting a very repeatable spark thru the wire on all cylinders. I am thinking that the head will have to come off and have someone else look at the valves, though I still haven't figured out the connection on why it runs pretty smooth while running retarded, and randomly missing 30-40% of the time on all 4 cylinders. The missing that is occurring has all the indications of either not enough compression, or simply no gas in the cylinder to fire on. No change in exhaust smoke color is apparent during the missing (indicating no wasted gas going up the stack). Maybe someone can shed some light here. It's pretty dark where I am. Thanx guys .........
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|