Re: Is there any one that has repaired the exhaust

Posted by Red Rider on January 04, 2004 at 18:42:27 from (66.235.45.149):

In Reply to: Is there any one that has repaired the exhaust hol posted by Paul G. in Mn on January 04, 2004 at 18:13:36:

Well Paul G, It depends on how chopped up the hole is. On my 600 when I got it someone had let the muffler and clamp slide down and put a pretty good grove in the sheet metal. I just welded a strap across the exhaust hole and centered a 1/4 in hole for my hole saw pilot and made the exhaust hole a 1/2 in larger in diameter. You really can't tell is larger and it sure is easier than trying to weld it up.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Is there any one that has repaired the exhaust Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]