Re: Re: IH 444 Posi-traction hung up

Posted by Ken Kunkel on January 06, 2004 at 16:56:36 from (207.220.43.249):

In Reply to: Re: IH 444 Posi-traction hung up posted by JB on January 05, 2004 at 20:52:56:

JB,
Thanks much for the input. I sometimes have a hard time stating facts in email (per my boss :-)). The shaft does come out of the right hand brake housing following the cam shape of the pedal. I don't know what is on the other end, but I suspect it's some spline-shaped coupler that slides over both axles to lock them together. If somehow the shaft became disconnected from the coupler, I wonder if I can drain the gear oil and come in through the PTO opening to manually slide the coupler off one axle; does this make any sense to you? I appreciate your time and thanks again for your feedback.

Ken in Virginia

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: IH 444 Posi-traction hung up Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]