|
Farmall Tractors Discussion Board |
Farmall H cylinder sleeve update
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Joe on October 10, 1999 at 22:03:02 from (206.58.190.96):
I wrote in a week ago about a sleeve moving in the cylinder. Well it's fixed now, and the clacking stopped. I think the old head gasket was for a Super H. The cylinder bore for a H is 3 and 3/8 inch and for a Super H is 3 and 1/2 inch. Number 2 and 4 cylinder sleeve would move the thickness of the head gasket. It did not hurt the head.
The flange of the sleeve hit enough of the gasket to cushion the head.
While I had it apart, we cleaned all the gunk out of the engine we could find. We put detergent oil back in and now it seems to puff a little blue smoke, could that from the detergent oil or just old age?
Thanks
Follow Ups:
Post a Followup
|
