Re: end play

Posted by Ed on January 16, 2004 at 20:44:50 from (152.163.252.227):

In Reply to: end play posted by SGT K on January 16, 2004 at 10:16:43:

Don't remove the shims. They are for setting the ring gear and pinion mesh and backlash. Check the end play with the drum installed because it clamps the outer bull pinion bearing against a shoulder on the shaft. If you still have to much end play replace the bearing.

Follow Ups:

• Re: Re: end play SGT K 06:42:22 01/17/04 (1)
  • Re: Re: Re: end play Ed 22:05:07 01/17/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: end play Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]