|
Farmall & IHC Tractors Discussion Board |
Re: IH Tractors - identifying model from serial nu
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy in NE on January 28, 2004 at 04:09:42 from (216.58.237.20):
In Reply to: IH Tractors - identifying model from serial number posted by Barry Cross on January 28, 2004 at 03:08:04:
What you have given us is a part number for one of the components of the tractor. Look in the Tractor Photos to the left in the Galleries section to narrow it down. Depending on the tractor you can find the serial number on a tag on the seat support or on the transmission housing. The A, B, and C's will have it on one side of the seat brace or the other. Starting with the H's you can usually find the tag on the transmission. Some of them have it embossed on a flat machined spot on the side of the block right below #1 spark plug. #1 is the front plug. Once you this you can click on the Serial Numbers link to the left of this page under the Research & Info section. There will be several different places to look such as Farmall, International, Farmall & International, etc. Give that a whirl and then once you have it narrowed down there are knowledgeable people on this site to assist you from there.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
