Re: sm motor

Posted by scotc on January 29, 2004 at 20:34:33 from (162.39.3.57):

In Reply to: sm motor posted by aaron on January 27, 2004 at 20:44:31:

get onto piston manufacturers websites, there are several that will custom-build them, con rods too. try not to get the cylinder walls too thin if you dont use sleeves. Deck plate wouldn't hurt if you could find one, if money is no problem someone makes them using head gaskets as a pattern. Simulates stresses from torquing down the head so the bore is true when the heads are on, worth a couple horses. dont think its neccesary if you use sleeves though. Could go with a DT360 or a 414 in there if you aren't pulling farm stock.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: sm motor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]