Farmall & IHC Tractors Discussion Board |
Re: mounting tire chains
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on January 31, 2004 at 02:22:45 from (216.208.58.150):
In Reply to: mounting tire chains posted by dave on January 30, 2004 at 18:30:54:
Dave: I have a Farmall 130 and just throw each wheel chain hook end first over the tire from the back. Spread the other end of each chain out behind tractor. Drive tractor ahead until the end of chain comes out from under tire at back. Hook them and go. If I don't get them as tight as I want at first I stop after a bit of driving and rehook. The only benefit to real tight chains is speed, so I never use tighteners of any kind. Chains actually give you better traction if a bit loose. Putting chains on takes me about 5 min. While I realize you are talking turf tires, and that is a bit different. On farm tires tight chains will work their way to between treads and never come out. If you mark your tire at hooks, you will find loose chains work their way around the tire in reverse of travel. This keeps chain on tire straight they will come out of the treads. Even on your turf tire with a loose wheel chain the tire will not spin inside it. To me ideal tension is being able to go to rear of last direction of tire travel, and being able to pull center of last cross chain off the ground out from tire face 1/3 width of tire. I have seen guys put bungies, special tighteners, etc. The chains will still work their way around tire and indeed tighten to point where they reshape the tire. I have seen tractor tires drawn in at each cross chain, to a point of damaging tire. Tighteners and bungies are really only good for short term high speed use.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|