Re: Re: Re: is this an IH loader?

Posted by JB on January 31, 2004 at 11:52:52 from (24.157.143.220):

In Reply to: Re: Re: is this an IH loader? posted by farmallsc on January 31, 2004 at 11:08:33:

Hi, it still looks similar to the Henderson loader that we had. I don't know why we had the PTO driven hydraulic pump unless it was because the original C did not have enough hydraulic capacity to run a loader. The SC did have live hydraulics which was better than the PTO driven pump as the SC didn't have live PTO, the hydraulics would only work with the clutch engaged. So if you wanted to lift loader while stopped, put transmission in neutral and let the clutch out. Clutch didn't wear out but pilot bearing would only last about 3 years.

JB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: is this an IH loader? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]