Re: Seal help.......

Posted by MT Pockets on February 07, 2004 at 20:46:42 from (205.188.209.82):

In Reply to: Seal help....... posted by Mike on February 07, 2004 at 14:46:32:

Mike, you can do this. Measure the outside diameter of where the seal goes in, and the outside diameter of the shaft. Take these measurements to a Bearing Supply store. They don't have to have any part numbers or brand names of tractors. And it most likely will be a lot cheaper than IH or JD or whatever. Steve.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Seal help....... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]