Re: Farmall H Wiring

Posted by gauger on February 13, 2004 at 19:04:43 from (172.166.17.114):

In Reply to: Farmall H Wiring posted by Bruce E. on February 13, 2004 at 18:19:33:

Typically the F terminal on the cutout is not used if you have lights on the tractor. The wire wound resistor that is used to reduce the field strength / output is part of the light switch. If no lights, a wire from the generator F terminal direct to ground would be high charge and a wire to the F terminal on the cutout would be low charge. There is a resistor similar to the one on the light switch inside the cutout. This is how it work's on the A,B,C. I assume the H is the same.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H Wiring Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]