Re: Wire order on distributer cap

Posted by Wild Horses on February 20, 2004 at 10:22:08 from (216.51.163.251):

In Reply to: Wire order on distributer cap posted by Tree K on February 19, 2004 at 19:50:58:

That doesn't sound like your problem. If it misses after it warms up, I'd check the plugs, and maybe the points & condenser also. It sounds like went the plug warms up it starts to fail. It's a common problem.
The order for both tractors is the same. 1, 3,4,2. Check where the rotor is when it should fire cyl 1. One or the other could have been installed 180 deg off. It will still run alright, as long as you realize it and run the wires correctly. The #1 should be at the front outside "corner".

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Wire order on distributer cap Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]