Re: off topic hyd question

Posted by lee on February 20, 2004 at 19:07:04 from (24.24.92.235):

In Reply to: off topic hyd question posted by Bob on February 20, 2004 at 18:26:25:

A detented valve stays where you put it when you let go of the handle rather than spring back to center when you let go. It will likely spring back to center when end of stroke is reached. A valve for a double acting cylinder may be detented both ways or just one depending on application. A valve for a wood slitter is generally not detented on the split stroke but detented on the return stroke. It will return to center immediately when you let go on the split stroke but will retract the cylinder completely if you slap it the other way and go grab another block of wood. On a hoe or loader the valves would not be detented either direction.

Follow Ups:

• Re: Re: off topic hyd question scotc 19:59:54 02/20/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: off topic hyd question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]