Farmall & IHC Tractors Discussion Board |
Re: Tighten up steering on Super A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on February 28, 2004 at 15:59:54 from (64.228.11.105):
In Reply to: Tighten up steering on Super A posted by J Risher on February 28, 2004 at 14:20:44:
J Risher: Inside your steering box there is a worm on the shaft coming from steering wheel. The other shaft going down through bottom of box with steering control arm attached has half cog inside driven by the worm on other shaft, That half cog is keyed to shaft with woodruff key. You can get lot of looseness right in that key. That one is the cheap and easy fix. You just have to remove front axle and drop bottom from steering box. I have run across a few of these with key way damage. I use a larger key and grind it to make a tight fit. I did fix one by welding key in shaft and grinding, but leaving it tight enough cog had to be put on with a press. It is really your call when you see how bad the key and keyways are. Another item that can cause looseness is a worn worm and cog. You can expect to pay dearly for them. I was quoted over $400. about 10 years ago. I decided that tractor could become my off road tractor.
Follow Ups:
Home
| Forums
Today's Featured Article -
Check Your Coolant - by Bill Radford. Great tips on how and when to check the coolant in your tractor.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|