Re: Re: When does a head need rebuilding on an F-2

Posted by Bob Kerr on March 04, 2004 at 21:00:51 from (64.12.97.12):

In Reply to: Re: When does a head need rebuilding on an F-20 ? posted by Pete L on March 03, 2004 at 13:31:27:

Just a thought, but did the governor have any wear? That might let the throttle get slightly sucked open too far and then the speed picks up enough for the gov to push it back closed causing a sputter. It might be right at that fine point where it it isn't an obvious gov problem, but enough to make it sputter off load. You might be able to rotate a half turn or so, that pot metal part that is on the gov and see if that helps. There is a spring inside that I think tensions the flyballs.I also thought about valve guides and throttle shafts worn, like a few of the other guys mentioned.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: When does a head need rebuilding on an F-2 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]