Re: Farmall B Valve train stuck in head

Posted by Bill N on March 25, 2004 at 19:32:38 from (67.225.145.57):

In Reply to: Farmall B Valve train stuck in head posted by Bill on March 17, 2004 at 17:03:13:

Thanks everybody - the studs and rocker arm shaft were misaligned and the rocket shaft was forced on so hard that even with a webbing under each stanchion and two come a longs the webbing lifted the entire engine with out anything budging. This was a recently overhauled engine!!!! I tried unscewing the bolts but one broke off without a bit of movement. I finally got them off using a series of sharp chisels between the head and the stanchions. It was of course virtually impossible to remove the head with the valve train in place.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Farmall B Valve train stuck in head Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]