Re: oil pan check valves

Posted by Randy in NE on April 05, 2004 at 21:22:00 from (68.229.171.249):

In Reply to: oil pan check valves posted by Dave A on April 05, 2004 at 19:44:00:

On my two C's I took a small piece of flat iron and ground it into the same shape as the original handle. I then drilled a hole in the center of it and welded it to the stem of the valves. It isn't orginal but it does work for now. I don't have my parts CD here at home so not sure if the valves can be ordered seperately or if you would need to get an entire oil pan. If you can order the valves then you would have to grind the old one off and weld the new one to the pan. I had one valve that wouldn't budge so applied a little heat and was able to get it to operate ok.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: oil pan check valves Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]