Farmall & IHC Tractors Discussion Board |
Re: Live Hydraulics for M
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dan on April 06, 2004 at 22:13:54 from (12.160.175.143):
In Reply to: Live Hydraulics for M posted by MM on April 06, 2004 at 19:04:14:
I wouldn't change all the gears, no real need to. The cam gar is a "light press" fit. Usually comes off easily after taking off the nut and lock. Has a half moon key in it. Timing is fairly easy with front cover off. If you don't have an IT or service manuel try to find one you can look at or copy that page from. One thing to watch is not to break crankshaft pulley when you take it off, try to put even pressure on it near the center. Remember to put oil slinger back on before you put on front cover. You may want to change front seal while there, especially because the one you have in the new front cover is an unknown. Someone else will have to tell you how the magneto is hooked to pump as mine has a distributor.
Follow Ups:
Home
| Forums
Today's Featured Article -
Check Your Coolant - by Bill Radford. Great tips on how and when to check the coolant in your tractor.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|