Re: Magneto drive gear on an M

Posted by Theman on April 13, 2004 at 09:30:36 from (65.248.77.5):

In Reply to: Magneto drive gear on an M posted by Jeff on April 12, 2004 at 08:38:11:

It sounds like the drive gear that is turned by the cam gear is off a tooth or so. You can change the timing in about 15° increments by pulling the housing loose and turning it one gear tooth. You can check this by noting when the mag impulse snaps. Look at the notch on the crank pulley in relation to the pointer on the gear cover. The mag drive turns in the same direction as the crankshaft.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Magneto drive gear on an M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]