Re: F-20 Valve guide question

Posted by Dave@NY on April 14, 2004 at 19:30:34 from (216.42.140.196):

In Reply to: F-20 Valve guide question posted by Shawn in MN on April 14, 2004 at 14:30:18:

You can press them out with a hydraulic press too,if you have access to one.The guides that are crusty will start breaking apart no matter what method you try.I made a tool from a piece of bar stock about 10" long,smaller than the O.D. of the guide,drilled in one end with a short piece of an old valve stem for a guide pin. Worked great!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: F-20 Valve guide question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]