Re: H4 impulse spring removal

Posted by Theman on April 15, 2004 at 11:02:45 from (65.248.77.5):

In Reply to: H4 impulse spring removal posted by Jeff on April 14, 2004 at 19:55:56:

The impulse spring is a coil spring that is located in the drive cap. You can tell immeditely if it is broken. There should be two steel plugs in the ends of it. The end catches on part of the pawl plate and winds up until the arm lets go of the pin in the mounting flange. At this point the spring pushes the shaft and pawl plate around quickly giving the magnets more speed to produce a strong spark.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: H4 impulse spring removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]