F20 Front Wheel Barings

Posted by grg's F-20 on April 19, 2004 at 10:40:24 from (209.94.161.43):

On Saturday everything was going along pretty good,on getting front end jacked up and supported,so wheels can be pulled for painting. Had one pulled off in 5 minutes then came the other wheel had all washers & nuts off and bearing would not move on shaft. Tried big hammer, 2x4, chisel ,torch, then grinder to cut inner race edge so when bearing cage was dismantled rollers could be pulled out one by one.

Then got wheel off over inner race and pounded race off shaft which came hard. Tried bearing from other side and slides on like it should.

Anyone else have this problem? Came from Factory like this -no signs of every being apart - one bend on lock washer only.

Follow Ups:

• Re: F20 Front Wheel Barings Nebraska Cowman 11:22:24 04/19/04 (0)

Post a Followup Name: E-Mail: Subject: Re: F20 Front Wheel Barings Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]