Re: radiator hose

Posted by RAyA on April 22, 2004 at 20:35:19 from (67.67.15.69):

In Reply to: radiator hose posted by Brad on April 22, 2004 at 20:10:29:

I usually try to use a pocket knife or screwdriver to pry under the lip of the hose, but you have to be really careful if it is on thinner metal so you dont bend anything. Other times I just use a hacksaw blade and cut the hose in the middle where there is no metal so I can get the parts seperated. Also you might could use a razor blade and cut along the hose lip down the outlet and pry the hose to loosen it that way. Usually I only cut the hose when it is too crusty to reuse though. Hope this helps some. Good luck, RAyA

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: radiator hose Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]