Re: Re: 656 oil problem

Posted by Hurley J. D. on April 29, 2004 at 19:09:00 from (67.128.178.65):

In Reply to: Re: 656 oil problem posted by Hugh MacKay on April 29, 2004 at 18:15:52:

That is my plan next. I have two push rods ordered. I do not know what happened to make them bend. They were on the number four cylinder. It has taken me while getting the engine together. There has been one little problem after the other. I will check the valve timing to make sure every thing is okay. I have run the engine about 5 minutes so far. I will have to make me a small tank and hook every thing up. The existing tank takes a lot of room on the top of the engine and and you cannot see much with it in place. Thanks for your help.

Follow Ups:

• Re: Re: Re: 656 oil problem Hugh MacKay 19:26:22 04/29/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: Re: 656 oil problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]