Re: M W clutch on an M

Posted by Kelly C on May 07, 2004 at 21:28:19 from (63.171.43.140):

In Reply to: M W clutch on an M posted by Brad on May 07, 2004 at 12:02:49:

There are 2 types of disks in the clutch. Metal spacers that gear to the bull gear and fiber disks that gear to the brake drum.
The metal ones you can get made at any machine shop.
The fiber ones are a little harder to come by.
Here are the specs for the one for a H. The ones for the M are the same just bigger.

The clutch disc you are looking for is a 121R which is obsolete. I do
have a drawing of that particular part. The specs are 13/64 thick, 8.25
OD, 5.5 ID, 6/8 D pitch on the teeth, 48 teeth, 20 degree pressure
angle. Some other info I have says Raybestos 500B and Fibre Plate Mat.
R500B Cure Co. Thats all I have, hope is some help to you.
Andrew-M&W Tech Service

I am sure if you call Andrew at M&W he can get the specs for the M. 1-800-221-2855

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: M W clutch on an M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]