|
Farmall Tractors Discussion Board |
Re: Re: Re: Re: Re: H Heads
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Tom H on October 26, 1999 at 20:33:28 from (209.240.200.64):
In Reply to: Re: Re: Re: Re: H Heads posted by justin on October 26, 1999 at 20:05:56:
So are you saying that it would be better to use a 300 head then one from an H Are they more reasonably priced?? Have you ever tried to run 300 or 350 pistons in a H block without the sleeve I think that the bore is about 3.575 so it wouldn't take much to make a 350 piston fit, but I'm not sure about wall thickness?? The head I had milled also has the valves cut out from 1.5 to 1.75 on the intake and 1.25 to 1.5 on the exhaust. I think I wasted my money on that head, I should have paid more attention to the diffrences.
Follow Ups:
Post a Followup
|
