Re: Re: Re: Tranny oil questions for an IH 1206

Posted by K.B. on May 13, 2004 at 15:00:07 from (209.163.43.97):

In Reply to: Re: Re: Tranny oil questions for an IH 1206 posted by Alberta Mike on May 13, 2004 at 05:14:07:

The plugs on the sides of the axle housings are the check/fill plugs. The drain plugs are at the very bottom of the axle housings, gotta crawl underneath the tractor to see them. Axle housings take Hy-Tran. Yes, it is confusing, and most guys don't know to check/change the axle housings. IH took care of that problem about halfway through the 56 sereis by drilling a hole between the differential housing and the axle housing, making it all one compartment. 06's get updated when the rear end is apart by drilling 1/2" holes on each side and knocking out the freeze plug between the inner axle bearing and the differential housing.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: Tranny oil questions for an IH 1206 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]