Farmall & IHC Tractors Discussion Board |
Re: Hay Making for Idiots or How Stupid is This Id
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TimV on May 14, 2004 at 06:36:07 from (68.175.159.120):
In Reply to: Hay Making for Idiots or How Stupid is This Idea posted by Kirk Grau on May 14, 2004 at 04:28:50:
Kirk: Go for it! Equipment for haying, (at least for starting out), is minimal--something to cut it, something to rake it, and something to bale it. Your 504 should work fine for all of these--we put up 100+ acres of hay for years with a pair of IH 300's and a Farmall A for raking. Even if you've got to start slow to begin with--drop the bales on the ground and pick them up with a pickup or pile them on a pull-behind flat-rack wagon, you can at least get the job done. Provided you're willing to put in a bit of wrench time, there's plenty of older equipment out there with lots of life left availible dirt cheap--often for little more than salvage value.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|