Re: bad noise when i put clutch in on 1466

Posted by txblu on June 08, 2004 at 09:23:51 from (199.46.199.233):

In Reply to: bad noise when i put clutch in on 1466 posted by Bryce Andreasen (Magnum) on June 07, 2004 at 21:20:29:

Clutch release bearing (throwout bearing) has pressure on it when the pedal is pushed and it is delivering pressure to the fingers of the pressure plate over the clutch disc. Dry, rusted, or otherwise worn balls in the ball bearing will make noise, but only while the clutch pedal is depressed.

Your leaping forward could be a condition where the balls have desinigrated and the thickness of the bearing is now thinner (intermittently as the worn balls flop around in there)which releases pressure on the springs and allows the pressure plate to contact the clutch disc and apply torque to the tranny.

Best get it fixed pronto.

Mark

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: bad noise when i put clutch in on 1466 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]