Re: Farmall H shift lever

Posted by Larry Martin on June 13, 2004 at 08:47:04 from (216.37.23.107):

In Reply to: Farmall H shift lever posted by Dave on June 13, 2004 at 05:24:06:

Check the pin through the shift lever and the holes in the transmission top that they go through. There is probably some wear there. If they are worn bad you can drill the holes out to 1/2" and the hole in the 3/4" pin in the shift lever out to 1/2" and replace the pin with a cut off #8 1/2" bolt. You can buy new drive plugs at the auto parts store for .25. I fixed both my 47 and 48 this way.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Farmall H shift lever Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]