Farmall & IHC Tractors Discussion Board |
Bought Another H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by kfox on June 14, 2004 at 21:08:54 from (67.241.59.243):
I went to the antique tractor auction near Farmersburg, In. Saturday, and bought my second 1941 H Farmall. The serial # is 72996, so I guess that is July 41, same month I was hatched. Most of the castings are dated around 2nd & 3rd week of June, so sounds about right. The owner said it was running when he bought it, and he parked it in the shed for a couple of years. It was stuck when he tried to get it running for the auction, and he didn't know why. I found out when I got it home yesterday....four gallons of oil & anti-freeze in the crankcase. Took the head off today, and # 3 sleeve is pushed through the side of the waterjacket. All the cylinders had rusted from water that leaked through the wrinkled up pop can that covered the manifold pipe. #3 sleeve had a 1 1/2" wide by 3" long window in the side. Amazing what a little water can do. The rest of the H is in very good shape, Sheet metal is very straight, and everything is origional except the steering wheel. The head looks ok (except for a couple of rusted ex. valves, and I don't think the water got that high.) Even got a really good radiator shutter. Haven't seen one in years. The other H I have is Serial #6621X1,, and it's kinda rough around the edges but it runs good. Looks like it's transplant time. You F-20 fans missed a good auction. I think there were eleven of them there. One was very good un-restored, and a couple of the others were good also. Eight or nine parts tractors, all with wheels, and some even with air in the tires, went for fifty to seventy-five bucks each. One with electric starter bell-housing (but not the starter) wnnt for a hundred and a quarter. Some restored Green tractors went for less than the paint jobs cost, but a rusted, beat-up AV went for $1700. You never know what to expect at a auction. Ken
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Earthmaster - by Staff. This tractor, manufactured by the Earthmaster Farm Equipment company in Burbank, California was made for only two years. The Model C came out in 1948 and was followed by the "CN" (narrow-width model), "CNH (narrow-width high-crop model), "CH" (high-crop), "D" and the "DH" (high-crop) in 1949. The main difference between the models was tire size, tractor width and cultivating height. The "D" series were about 20 inches wider overall than the
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|