Re: Clunging noise when using pto

Posted by captaink on July 02, 2004 at 08:56:17 from (66.115.212.249):

In Reply to: Clunging noise when using pto posted by Tom in Michigan on July 01, 2004 at 10:10:12:

Had the same noise on a 560 and it turned out to be the seasonal disconnect clutch on the PTO. I’m not sure if a 504 had the same thing, but on the 560 on the bottom of the TA housing there is a short lever about 3 inches long with a 5/16” bolt in it. Square balers seem to raise havoc with this since the load is constantly changing. Mine broke and I ended up replacing it with a coupling like the one used further back in the PTO drive line.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Clunging noise when using pto Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]