Help with F-30

Posted by Jerry on July 22, 2004 at 19:20:03 from (134.215.203.55):

I have been looking for a set of sleeves and pistons for an F-30 (same as a 10-20). I've only been able to locate a couple sets, both of which are not for sale. I was wondering if someone had a set, or knew someone that had a set that they were willing to part with.

Also, I was thinking of boring it out a little and putting some pistons in it that are more available. I believe that a set of I-9 industrial pistons might work. (not that there a lot of them around either) They are the closest to the size I've found. An F-30 has a 4-1/4" in bore with a 5" stoke the I-9 has a 4.4" bore with a 5" stoke. I would be taking .150 out, which is only .075 off the wall. Would this lead to heat problems? How thick are the sleeves in an F-30? I heard they might be a half inch thick. Any ideas would be much appreciated.

Thanks,
Jerry

Follow Ups:

• Re: Help with F-30 pg 03:17:18 07/23/04 (1)
  • Re: Re: Help with F-30 Jerry 00:09:55 07/24/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Help with F-30 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]