Re: DRAINING THE STEERING GEAR BOX ON IH 340

Posted by Farmer Bob on July 24, 2004 at 17:54:46 from (64.113.0.116):

In Reply to: DRAINING THE STEERING GEAR BOX ON IH 340 posted by JIM on July 24, 2004 at 17:18:34:

Look for a square shouldered 1/4" pipe plug on the lower middle front of the upper bolster to the left of the large hex nut that covers the end of the steering shaft. Both of these are behind the sheetmetal bottom grille support if your tractor has it still in place. Many have gone missing over the years.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: DRAINING THE STEERING GEAR BOX ON IH 340 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]