Re: 340 generator and voltage reg question

Posted by Farmer Bob on July 24, 2004 at 22:48:27 from (64.113.0.116):

In Reply to: 340 generator and voltage reg question posted by yooper on July 24, 2004 at 20:47:04:

Yooper, run the larger of the two wires from the "Gen" terminal of the regulator to the "A" post on the generator, the smaller wire goes from the "F" terminal on the regulator to the "F" post on the generator. The "Gen" terminal is the single terminal on one side of the regulator. Look for the letters stamped into the tabs sticking out of the regulator. On the side with three terminals, the center one should be "Bat" with the other two being "F" and "L".

Follow Ups:

• Re: Re: 340 generator and voltage reg question yooper 05:39:41 07/25/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: 340 generator and voltage reg question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]