Re: Cleaning coolant passages in A block

Posted by Roger WI on July 26, 2004 at 19:49:44 from (69.58.151.98):

In Reply to: Cleaning coolant passages in A block posted by Ron Munger on July 26, 2004 at 07:06:18:

Ron, The Farmall A has wet sleeves, so if you take the sleeves out you can clean out the whole inside of the block. I had a Super C that when I pulled the sleeves I found all kinds of sludge and even a rag in the block. I took off the oil pan and flushed all the sludge and dirt out. I then replaced the o-ring seals on the sleeves and reinstalled them, since the engine had been recently rebuilt (by a bad mechanic). Since then on my Farmall B I recently finished, I completely stripped everything off the block and had the block hot dipped at the local NAPA shop. That really comes out nice (almost like new). Roger

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Cleaning coolant passages in A block Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]