Re: Tricky Timing Question

Posted by El Toro on August 22, 2004 at 13:34:51 from (66.119.33.135):

In Reply to: Tricky Timing Question posted by Josh on August 20, 2004 at 18:40:51:

Hi Josh, Count the teeth on your cam gear, it should be 64 or 62 teeth. The other gears would have 32 or 31 teeth each. I was counting the teeth in my IH manual on a Farmall C. The Super C
should be the same. There should be a 2 to 1 ratio between the cam gear and the smaller gears.
One revolution of the cam gear to two of the small gears. Hal

Follow Ups:

• Re: Tricky Timing Question Josh 17:47:56 08/22/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]