Farmall & IHC Tractors Discussion Board |
Re: 650D/WD9/MD etc. injector pump Troubles...HELP
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ron in Nebr on August 23, 2004 at 20:52:00 from (65.172.143.27):
In Reply to: Re: 650D/WD9/MD etc. injector pump Troubles...HELP posted by Farmaller on August 23, 2004 at 14:09:27:
Thanks- I"ll check that out. I really don"t know if that"s the problem though, since I have had it running on deisel since I"ve bought it. Would a stuck rack keep the primary pump from pumping but still allow the tractor to run? The reason I ask is because if I fill the secondary filter clear full of fuel through the bleed hole on top, then it gives a good spray of fuel when I bleed each injector and runs good for just a little while. Then it quits and it won"t bleed out the secondary filter. I took the output line off the primary pump and there"s just no fuel being pumped out, like I said in the first post, it just seems like the primary pump isn"t turning.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|